All Collections
Basic Usage
VAG FRF selection window
VAG FRF selection window

(update, dowgrade and back to stock)

Régis Thomas avatar
Written by Régis Thomas
Updated over a week ago

This feature lets you select and flash a complete and original FRF file from a list of files compatible with the selected ECU. It is available for both Master and Slave tools on the following ECUs :

DCM6.2V
EDC17C46
EDC17C54
EDC17C64
EDC17C74
EDC17CP44
EDC17CP54
EDC17CP74
MED17.1.10
MED17.1.27
MED17.1.62
MED17.5.21
MED17.5.25
PCR2.1
SIMOS 18.x
SIMOS 12.x

Processing this operation will have the effect of returning the vehicle to its 100% original state. Any modification previously made (tuning, patch, unlock, ...) will be erased.

Depending on the files available on the server, you can find up to three different types of files in the list.

Update (green)

The file(s) listed in green are updates for the file currently installed into the vehicle.

Flashing this kind of file will reduce the risk for the customer to receive an update at the dealer once the car has been tuned.

Current file - Back To Stock (blue)

The file listed in blue corresponds to the original version of the file currently installed in the vehicle.
If you have any doubt wether the car has been already modified by another tuner or not, you can flash this file in order to bring back the car back in stock mode.

Downgrade (grey)

The file(s) listed in grey are older than the file currently installed in the vehicle.

If the vehicle has received a Diesel Gate update, you may find a previously installed file in this list.

We work hard to extend the list of FRF files currently available in AutoTuner. Should you have any file (FRF or original backup read in Bench/Boot) that is missing on our side, we would be grateful if you could send it to us through a support request.

Did this answer your question?